Bladeless Fan Final Report Part 2

Description

Just as a brief recap to my project, I created a 3D printed bladeless fan. The design is inspired off of the Dyson fans, but on a smaller scale. My product was designed to be handheld, and portable. One of the major design aspects of my product is the removable head. I wanted the ability to change out the circular head piece with whatever design I wanted, so I printed a heart shaped head piece and designed a locking mechanism that also seals.

IMG_6289

What does it mean?

My project was not only meant be functional, but it had to be aesthetically pleasing as well. After testing the device I have found that it does not function the way it should. The head piece impedes the flow of air, rather than amplifies it. While I could spend months trying to analyze the flow through the channels to get the perfect part, I wanted to have an aesthetically pleasing design first. I believe my product captures a futuristic aesthetic with its simple curves, and plain white color. Since this was 3D printed it had a matte finish, but I think if I had the capabilities to mold it and get a glossy finish that would really bring out the aesthetic I want. Even though the device does not function the way I wanted, it still demonstrates how the technology is supposed to work. Shown below is a video taken in slow motion of smoke being sucked through the fan.

and a close up of the front.

While my product will not cool you down on a hot day, it will demonstrate the effect of viscous flow. So the takeaway from this project is that not all projects have a clear defined purpose. I went in thinking I would make a cool product that could be sold, and I ended up with a device that can be used to show the wonderful effects of fluid mechanics.

Moving Forward

I think this project was overall a success. I was able to 3D print a full bladeless fan, and design a detachable head system using a locking mechanism that seals. I was able to successfully integrate a fan/compressor, a latching push button, and a battery into my 3D printed casing. Now moving forward I would change and improve upon a few things. First, I would find a better power source. 2 9V batteries work fine, but over time they can get expensive. Second, I would design a new cap. The bottom cap I am currently using has no texture and is really difficult to put on and remove. This makes it almost impossible to replace the batteries when it is needed, therefore printing a new cap is on the list of things to improve on. Finally, I would conduct fluid analysis on the head piece. Now that I have most of my aesthetics down, I can look into the actually fluid mechanics of the system. I can conduce computational fluid dynamics (CFD) analysis on the part to get the perfect profile. This will also tell me if I need to find a new fan or not. There are many things to improve on with this design, but I think it turned out to be a success in the end. I learned a great deal during this project.

20160429_010304

Presentation

Previous Post
Piet Mondrian LED dress
Next Post
Road Worn Speaker Guitar (Why and What Next)

4 Comments. Leave new

  • First off, I saw your project at expo and since you were right next to me, I got to look at your project rather extensively in person and was totally *blown* away! Hahaha. I love how the head can be switched out and customized as well! I did notice that the 3D printing seemed to be splitting at one junction, so my only recommendation would be maybe spraying a layer over the base so it holds together. Overall, amazing project and I think it turned out to be absolutely excellent!

    Reply
  • Derek Sikora
    May 3, 2016 7:35 pm

    Love the video demonstration. The product turned out nicely and the interchangeable heads was a great idea. You could totally push dyson out of the market…they’re way overpriced.

    Reply
  • Awesome work man. Congratulations on finishing this project and having it work and look great. It’s great to see a lot more visuals of how your project works. are you going to continue pursuing this project?

    Reply
  • Great work Brandon. Congrats on getting this project successful and polished. I really liked the videos with the vapor generator. Looking at it itself is a a unique aesthetic. I like how your project turned out and how polished it is. I still think you can print this on a cheaper printer. Can you incorporate a snap fit lid so that it is easier to replace the batteries? Overall good job on your project. Enjoy your fans in the summer 🙂

    Reply

Leave a Reply to Ben Yorkey Cancel reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.