Main Project Final Report

Illumination Aesthetic

For this project I wanted to take on the aesthetic of Illumination. Illumination is using light to achieve an attractive lighting effect on an object. I wanted to use LED strips to make something that could be held. I chose this aesthetic because I really like the look of LEDS in dark areas and think it’s just a pleasant sight. An illumination example is shown above. 

Ripperblade.net

I was inspired by Ripperblades.net which is a company that makes acrylic engraved swords with a strong laser at the bottom of the handle in order to illuminate the entire sword shown above. The acrylic is usually clear and the laser pointer at the bottom tends to be very powerful. These blades typically cost up tp $150 so it was defintely something I thought I could do and save money on. 

Elucidator from “Sword Art Online”

I wanted to do a weapon design that was recognizable from pop culture. I ended up choosing a sword called the “Elucidator” from the anime series “Sword Art online”. It’s a sleek black sword that looks very appealing to me, I chose this because I believe it was simple enough to make, but would be fun also.

Materials:

  • LED light strip
  • Acrylic Sheet
  • Double Sided Tape
  • Paint

 

CAD screenshots from SolidWorks

I ended up tracing the design from a template found online and made a Solidworks CAD model using 1/8″ inch extrusions to mimic 1/8″ acrylic pieces.
The screenshot with the slot in the middle of it is to allow an LED light strip through to give it the illumination aesthetic. I will make two pieces of the other CAD model without the slot in the middle in order to sandwich the LED in the middle.


Final rendering of CAD model for Elucidator


This is the final DXF file that I created from the SolidWorks file for the laser cutter. I sent this to PONOKO to laser cut since I could not do it myself due to COVID-19.


Images of the Laser cut Acrylic once it arrived from Ponoko.com


Images of the LED light strip inside Acrylic

This is the assembly process of the sword once it came in from Ponoko.com. As you can see the LED light strip fits right into the middle piece which is then covered by another acrylic piece once installed.


Final Product of my version of the “Elucidator”

Once fully assembled, the LED control box is a portable battery powered LED with a control module attached to the bottom.

Final Images of my Illumination Aesthetic LED Elucidator sword in a dark lit room

This is my final product and I must say I was quite pleased at the look of it in the dark. I think the white opaque acrylic turned out great and allowed the LED strip to bleed throug just enough. The design of the sword looks almost exactly like what the image shows and i’m very content with it.

Future iterations:
For the future iterations I would like to get a better LED with more LED’s per inch in order to create a more fluid light and make the illumation more pleasing. I would also like to spray paint the sword in the future also and leave the middle white so the LED can still shine through.

 

Previous Post
Final Project 1: Succulent Mirror
Next Post
Final Project Report 2: Hoodie

2 Comments. Leave new

  • Bryan Wong
    May 3, 2020 3:05 pm

    Hey Kensue, I really liked how you implemented your aesthetic into your project. By using illumination as your aesthetic and then using an LED light strip to create an attractive lighting effect was very creative. I also liked your idea of spray painting the outside layers so the light would only shine through the edges. As a neutral question: in the future, do you think you’d like to make the sword longer or is the length you achieved here what you originally desired? As a permissioned opinion on your design, I would like to suggest adding some sort of wrap for the handle of the sword. Maybe using bike handle tape would be useful and make holding the sword more comfortable instead of holding the sharp edges of the material. Overall, I think your project turned out great especially under the current circumstances!

    Reply
  • Paul Tapsall
    May 1, 2020 10:23 pm

    Kensue, I love how your project turned out! From the pictures I can tell that the design process was very thought out. I think a spray paint coating would be a great next step, and I like that you used an LED strip to save some time.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.