This past week was all about figuring out the tubing for the lights. After finishing the CAD model I knew what length I needed to cut the arrows and how many of each length I needed. With that, I began to cut. It was a long and tedious process, but I finally got all of them cut (approx. 130 tubes). I then created a box out of foam core and cardboard to get a visualization of the final product because the CAD model wasn’t quite doing it for me. The construction and assembly can be seen below.
Construction of the Base
Creating the Arrow Pattern
Once the arrows were in place I was able to see the pattern I had been imagining start to come to life. Two different angles of the end result can be seen below. As seen in the picture, looking at the piece from different angles gives it a different appearance even without any lighting. Overall I was very happy with the results.
The final steps are going to be to incorporate the LEDs, create the art out of the final materials, and perform some finishing aesthetics touches. The biggest thing I am wrestling with currently is how to finish the tubes. Currently the arrows are all different colors, but follow a similar color palette. What I am trying to determine moving forward is whether or not I want to paint the shafts or leave them in an unfinished state to preserve some of the arrow legacy.