Project Aesthetics Compared to the 20th Century: Wall clock

My project is building a wall clock with a Mechanical Engineering theme that includes tools such as gears, wrenches and hammer. My initial design include the use of gears that can rotate And tools for the numbers on the clock corresponding to the clock time. For now I have designed tools for the 12, 3, 6, and 9 numbers of the clock. If I decide on 3d printing the frame, then i will have a tool for each number.

There are millions of designs in aesthetics for wall clocks. In the 20th century wall clock designs were bulky and usually rests on a table. The dominate color is found to be wood like colors. Some examples show that wall clocks at that time had many components such a pendulum or a mini statue. other examples show a big frame around the clock with many hand made aesthetics that is curved into the wood.

My design compared to that is that i want to have a lightweight clock that has minimum use of material but conveys a large message about its aesthetics.

References:

https://www.merritts.com/merritts/public/blog.aspx?ID=1042&Title=A%20Look%20Back%20on%20New%20Haven%20Clocks

Previous Post
20th Century Design Movements Comparison
Next Post
Streamlining to Post Modern

3 Comments. Leave new

  • I like this project because it certainly is more difficult than meets the eye, especially if you are going to make the clock from scratch. I like your idea of making the clock light weight and compact. I am excited to see how it turns out. The 3-D printing might make it feel a little cheap, that is my only concern.

    Reply
  • Andrew Oliver
    March 31, 2019 4:55 pm

    Hello Aziz, I really like your idea for a final project. I think it would be a great for you to 3D print your clock frame, as it will allow you more freedom in your design. Trying to incorporate some of the other aesthetics that clocks of this type have will make your piece look better and more people will like it

    Reply
  • Tanner Wismer
    March 25, 2019 1:41 pm

    This is a really interesting idea for a final project. A wall clock for your final project can take on basically any aesthetic you want. Definitely think about all the aesthetics that are available and choose one that helps convey your intended idea or message.

    Reply

Leave a Reply to Tanner Wismer Cancel reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.