My project is building a wall clock with a Mechanical Engineering theme that includes tools such as gears, wrenches and hammer. My initial design include the use of gears that can rotate And tools for the numbers on the clock corresponding to the clock time. For now I have designed tools for the 12, 3, 6, and 9 numbers of the clock. If I decide on 3d printing the frame, then i will have a tool for each number.
April 7: get the clock motor
April 7-14: buy 3D printing material and learn the 3D printing procedure
April 14-18 : finish the CAD and print it
April 14-22 : prepare to present and make any final changes
April 22 : present to my pod
Abigail Angwin
Adlai White
Alexis Cisneros
Alex Fitzgerald
Alex Gebben
Alex Reynolds
Aj Terio
Andres Serrano
Aryan
Ari Matrajt Frid
Arjun Mody
Barrett Lister
Ben Clairday
Benjamin Hyde
Blake Wilson
Lavender Giebner
Brandon Phillips
Cannon Leitz
Chris Wachuta
Colton Huff
Collin Kendall
Cole Metcalf
Collin Ruprecht
David Li
Duncan Laird
Dylan Breglio
Efrosini Krokos
Emilee Novak
Ethan Polacsek
Ethan Sanchez
Ethan Silverman
Fin McKemey
Garrett Miller
Grreshan Ramesh
Hailey Usher
Helen Do
Ian Farrar
Ian O'neill
Jason Allshouse
Jace Aschbrenner
Jarod Ocampo
Jadin Zaccagnino
Jess Corbitt
Josh Beijer
John Bileschi
Jon Ezell
Jonathon Gruener
Josh Gregory
Josh Sweeney
Juliette Goubeaud
Katie Schutt
Kevin Kim
Kelso Norden
Kyra Anderson
Kyle Hashiro
Kyle Pohle
Luke Nicol
Luke Prins
Max Lantz
Maddox Mitchell
Matthew Osborn
Max Palish
Michael Becerra
Michael Gray
Nicholas Gotlib
Nick Olguin
Noah Howell
Oliver White
Peter Arnold
Riley Menke
Sam Biehle
Sammie Duran
Sam Gluskoter
Sarah Pepper
Sean Riddle
Sierra Greeley
Sophie Berry
Sophia Montie
Tim Hellweg
Tiana Vitry
Trent Bjorkman
Travis Mulford
Tyler Brown
Venkata Sanyasi Krishna Vidhan Rallapalli
Vincent Tang
Yuting Wang
Aryan Gandhi
Jean Hertzberg
Shrey Naresh Solanki
4 Comments. Leave new
[…] Construction Timeline […]
It seems like you have a set plan on your project, looks good! Have you considered, if you are going to use gears, wrenches, etc, using the aesthetic of steampunk?
Hi Abdulaziz,
I like your idea. Your time line looks doable. You seems you had every thing worked out. Good luck.
Hello Aziz, your timeline looks good. You may not need that much time to learn 3D printing, it is fairly straight forward and I would be happy to help you if you need it, I have spent a lot of time 3D printing large parts.