Blog 14: Final Project Report Part 2: Why and What Next? Reflection on the semester. Compare your original project intent to what you ended up with. What did you learn from your project, and from the class? What will you do next with the project? What do you wish you had done differently?  …

Final Project   Final Project 2.0 This is the second version of the Final Project. I removed the desk toy aspect. It was too complicated and the lack of tools and resources made it too difficult to work consistently. I am refitting the box to hold jewelry. I plan to buy foam for the box…

Everything was recorded/midi mapped in Ableton Live 10.  All drum sounds were royalty free, one-shot drum samples from the sampling service “Noiiz.”  Anything external was recorded with a Sennheiser MD 421 microphone and all the guitar was played on an Ibanez Stratocaster copy from 1983 or so, run through a Marshall tube amp.  All live…

Timeline My timeline for this project was similar to as initially planned but varied due to circumstances involving the Covid-19 quarantine – my adjusted timeline is pictured below: Due to the displacement from campus, I lost about a week of time to work on the prototyping of the initial sculpture designs initially, which pushed my…

The fabrication process for my final project was fairly simple, and I was able to complete most of it over spring break. Since I was staying at my parent’s house for the week, I was able to use their tools in the fabrication process. The pieces that required specific manufacturing were the wooden base, and…

Timeline As an overview, my project (COVID Apparel) involved developing interactive apparel that encourages social distancing during the COVID-19. The project timeline went largely as expected. The only noticeable changes were larger shipping times for electrical parts. COVID Apparel timeline The week of the Design Review will (3/09 – 3/15) was designated for ordering prototyping…

In this post I’ll be detailing how the algorithm works and what tweaks I applied to create the different images shown in my presentation. Since I was a little confused on the topics of the final blog posts, most of my schedule stuff got put into last week’s blog post. So the “How” will be…

For the “how” behind this project, I initially wanted to go with the route of laser cutting the outline (as shown above) based off of a 3D Solidworks model to increase the accuracy of the cutout, along with manufacturability of the piece. However, due to COVID-19 and the loss of University resources, I had to…

https://www.aesdes.org/wp-content/uploads/2020/04/zoom_0-1.mp4 Video 1. Final Presentation to Pod   My design process went through stages of change, with two large pivot points resulting from campus closures and lack of available materials and facilities. In  the beginning the arm was meant to be created out of multiple kinds of cardboard, paints for aesthetic design, and super-adhesives in…

Timeline: My design process went through three major changes which ended up changing the project significantly. First I had to find what object I wanted to create and then what aesthetic I would fit with it. I settled on a Octopus Statue with the wooden sculpture aesthetic. In my first ideation process I was going…

After the Covid crisis started, I transitioned my project from the drink maker to a hydroponic garden. I wanted to make this system without relying to many ordered parts, and also keeping it cheap. There were many aspects to get working: The piping, the mounting, the pump, and the lights. For the main structure of…

I am lucky to be able to say my original project intent has not changed much from its original conception, despite the COVID pandemic. I would even go so far as to say it was made better by the circumstances, if I simply decide to complete physical manufacturing at a later date. Here you can…

For my final project I am designing some clothes that are minimalist in style. This was not my original project plan I had planned to make a neon sign but with the developments of COVID and campus closing I have shifted to something I can complete from home and that I think is pretty cool.…

Introduction As COVID-19 continued to spread forcing the campus to close, I grew more worried about how I would complete my project. Thankfully, however, I was able to fully fabricate it with the use of my Dad’s tools at home. There’s no doubt the final product would’ve turned out better had I had access to…

After the COVID-19 restrictions my next step was to reassess my capabilities of finishing this project. I had already acquired the Arduino I needed to get the motion sensor working and was beginning the code, however due to delays the accelerometer needed to make the motion sensor work was delayed in shipping so I was…

 

See the post titled Speaker Enclosure: Main Project Part 1 for the final renders, drawing set, budget and manufacturing plans. This post is a discussion of the design process, thoughts on the semester and outlook going forward. This project has had a lot of changes in direction, but despite the quarantine forcing me to switch my…

My project is a mountain bike jersey/t-shirt with an action painting and symbolism aesthetic. Figure 1. I wheelie like my mtb shirt My last post has all the details of what it is and how I made it (the whole process!). This post will contain a little more details on why I chose this project/aesthetic,…

Timeline Since I no longer had to create a physical table, my timeline for this project became more relaxed. I was able to step away from the project for the duration of Spring Break and was able to dedicate two full weeks to modeling my table on Rhino 6. I spent the following week creating…