Since this blogpost is late, I am going to highlight the actual timeline of this project: March 27th – March 31st – Test plywood cuts on laser cutter April 1st…
Reflecting upon my project, I am mostly pleased with what I did, considering the re-design and also the poor timing with senior design. I definitely wanted to make something I…
For my final project, I decided to make a bedside lamp with an integrated drawer. I originally had the idea of making a dynamic lamp/storage unit that rotates about a…
For my final project, I planned on making a lamp/storage unit for my jewelry that rotates about a post for customizability. These are the top 5 constraints I had with…
For my main project, I have decided to make a customizable bedside lamp that also doubles as storage for small items you would normally keep by your bed, such as…
When I began brainstorming ideas for the main project, the dynamic requirement had me stuck. My immediate thought was that I would have to integrate some sort of motor or…
Being both in the ME program as well as the TAM program here at CU, I have acquired a very strange combination of skills ranging from technical/analytical skills associated with…
I think my engineering mentality has led me to believe that the best way to start something is to think linearly. But things never ever end up the way I…
For the Upcycle project, I have decided to utilize the empty glass bottles and produce bags I have lying around my apartment. My idea is to make hanging planters to house…
I recently took an ATLAS course where we were tasked to write a Design Manifesto as our final paper. At first, I thought it would be easy to pin down my…