In order to complete my project by April 17th (I think that’s the due date) I will need to do some light machining.
4/7: Obtain all final parts. The only parts I still need are a bolt and bearing from home depot. which shouldn’t take me more than a few days.
4/12: Cut all pieces to size including the bearing press fit into the triangular wooden piece. This should take about 4 hours of time in the woodshop
4/14: Put nails into the edges of the wood cutout and mount onto my wall. I can let it sit over the weekend to make sure all pieces are holding together.
By following this timeline, which is by no means unrealistic, i should be prepared to present on the first day of sub group meetings.
Abigail Angwin
Adlai White
Alexis Cisneros
Alex Fitzgerald
Alex Gebben
Alex Reynolds
Aj Terio
Andres Serrano
Aryan
Ari Matrajt Frid
Arjun Mody
Barrett Lister
Ben Clairday
Benjamin Hyde
Blake Wilson
Lavender Giebner
Brandon Phillips
Cannon Leitz
Chris Wachuta
Colton Huff
Collin Kendall
Cole Metcalf
Collin Ruprecht
David Li
Duncan Laird
Dylan Breglio
Efrosini Krokos
Emilee Novak
Ethan Polacsek
Ethan Sanchez
Ethan Silverman
Fin McKemey
Garrett Miller
Grreshan Ramesh
Hailey Usher
Helen Do
Ian Farrar
Ian O'neill
Jason Allshouse
Jace Aschbrenner
Jarod Ocampo
Jadin Zaccagnino
Jess Corbitt
Josh Beijer
John Bileschi
Jon Ezell
Jonathon Gruener
Josh Gregory
Josh Sweeney
Juliette Goubeaud
Katie Schutt
Kevin Kim
Kelso Norden
Kyra Anderson
Kyle Hashiro
Kyle Pohle
Luke Nicol
Luke Prins
Max Lantz
Maddox Mitchell
Matthew Osborn
Max Palish
Michael Becerra
Michael Gray
Nicholas Gotlib
Nick Olguin
Noah Howell
Oliver White
Peter Arnold
Riley Menke
Sam Biehle
Sammie Duran
Sam Gluskoter
Sarah Pepper
Sean Riddle
Sierra Greeley
Sophie Berry
Sophia Montie
Tim Hellweg
Tiana Vitry
Trent Bjorkman
Travis Mulford
Tyler Brown
Venkata Sanyasi Krishna Vidhan Rallapalli
Vincent Tang
Yuting Wang
Aryan Gandhi
Jean Hertzberg
Shrey Naresh Solanki
2 Comments. Leave new
Seems like a reasonable timeline. A visual could be very helpful, something like a gantt chart that shows the critical path and other driving tasks.
Also, how much slack do you have for each task? Have you accounted for the fact that you have not built one of these before?
This is a good timeline and it seems like you will be done in time to have time to go over and make sure the project is all good before running out of time. I think you could even have enough time to make more than one of these if you think it could be useful! Will you need to use the makers space at all to do this? You should definitely check that out as a resource! good job.