Final Report Part 1 “The What” – Mountain Wall Art

For my Final Project i decided to create a Mountain Range Wall Art that imitates and takes inspiration from the Flatiron mountains as a gift for my little brother. After my up-cycling project, where I created a wall art from wine cork in the shape of New Zealand (as shown below), I decided to take a similar route for my final project. I really enjoyed making my up-cycling project and decided to why not upgrade the idea! This is basically how I formulated the realization and vision for my final project.

So once I knew that I wanted to do another wall art piece, I took some time to think about what I wanted to fabricate as the piece. It quickly came to me that I wanted to do a piece focused on the mountains, that was constructed from a nice and aesthetically pleasing quality wood. Since I wanted to make this as a gift for my little brother, who is soon to attend CSU as a Freshman, I decided what better way to incorporate the mountains and CU Boulder (the better school!) than to fabricate my final project in the shape of the infamous Flatiron mountains.

So, I began some research into if something like this had already been created and to generate ideas on what exactly I wanted to do. During my research, I found multiple techniques to accomplish the theme and simple, sturdy aesthetic I was aiming for. One such technique, was wood burning. This technique is basically drawing on wood with a heated rod, which “engraves/burns” the wood, allowing the artist to burn beautiful shapes and geometries into the face of the wood. This was interesting at the time, but didn’t really fit the bill, especially since wood burning required tons of practice and technique to accomplish intricate and beautiful designs.

From this point, I set my mind on cutting out the shape that you see above. However, as mentioned in previous posts and inspirations for my design, I had found the overall design and idea from a source through my research. A local one man company, called Bear Mountain Metal Art, run by Bobby Singleton, develops these amazing aluminum wall art mountain pieces (as shown below). He drew inspiration from the mountains in general, and when fabricating his designs, he uses an aluminum sheet and then cuts out the piece with a handheld plasma laser. His artwork popped up during my research, and I instantly fell in love with the art and design.

So, I decided to follow his template and design, and create my own founded off of his work. I started with simple sketches and ratios to determine the best size (width and height) of my final project. As shown below, I decided to settle on a 3 x 0.6 ft dimension for my final project. Rather than using Aluminum like Bobby, I decided to use a nice quality wood, to further distinguish my aesthetic of sturdy, beautiful simplicity. Mountains exemplify this as they are simplistic in their nature, and utterly shockingly beautiful. The wood also alluded to the natural feeling and calmness that nature, and the mountains more importantly, portray.

 

References:

  • https://www.bearmountainmetalart.com/listing/522291719/boulder-mountain-range-flatirons-hiking
Previous Post
Final Report Part 1 – Steampunk Headphone Stand
Next Post
Construction Update: Desk Toy

4 Comments. Leave new

  • Austin-

    This will be one of my in-depth critiques, following the professor’s critique format, I hope you find some of my feedback helpful and best of luck with the rest of the project with the time we have left, amidst the current events.

    For statements of meaning: Very nice jigsaw, I particularly like the inspiration behind your project, as it’s from a local artist, and it’s very relative to all of us as CU students.

    Artist Asks Questions: Let me know if you have any specific questions.

    Neutral Questions: Is there any alternative woods that you would’ve wanted to use in your project, to bring about your aesthetic vision? What was the hardest part of the design process for you post-COVID?

    Permission Opinion: I have an opinion, if you would like to hear it, please reply to this post, and I will reply accordingly.

    Best.

    -Will

    Reply
  • Justin Engbrecht
    April 23, 2020 3:05 pm

    Hello Austin. I love that your always making great creations for your family! I decided to do an in-depth critique of your Final Report 1 post.

    As a statement of meaning, I think it’s great that you’ve drawn inspiration from a local artist, and created a final product that represents the Flatirons.

    Please let me know if you have any questions for me regarding your main project to fulfill the “Artist Asks Questions” step of Liz Lerman’s critiquing methods.

    As a neutral question, what specific wood did you choose to make your art from? Did it take a long time to learn to operate a jigsaw over the semester, or is that previous knowledge you have?

    Finally, I have an opinion about how you can improve the aesthetic of the piece, if you would like to hear it.

    Once again, great end result for this project!

    -Justin Engbrecht

    Reply
  • Nathaniel Wang
    April 22, 2020 10:34 am

    The jigsaw work was really impressive, and it shows that you put some hard work into this project. I think white lights would add a nice touch as compared to the colored LEDs, however stand alone it looks super clean and well finished. Nice job!

    Reply
  • Max Armstrong
    April 20, 2020 11:49 am

    Nice jigsaw work! Those interior corners are tough to get well, but it looks like it came out really clean.

    Reply

Leave a Reply to Max Armstrong Cancel reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.