As I continue with the project, I was originally playing around with the idea of using existing, recycled gears. After spending several hours at the local McGuckins, I discovered that the size of gears I want are mostly found in only plastic. I want to use recycled gears, but I am afraid of the potential issues with meshing gears. I found that I love the combination of unique gears, but those do not mesh well and have the potential for damage over time. I have then decided to move forward solely with laser cut gears. Over the last few days, I have been playing around with different CAD designs and picked up scrap material from McGuckins. By the time I return from break, I plan to have a design I would like to cut and test. This will allow me to laser cut directly after break and assemble that week after break. I will then have about two weeks to change out components and make any necessary changes.
Mechanical Jewelry Project Update
This Year’s Students
- Abigail Angwin
- Adlai White
- Alexis Cisneros
- Alex Fitzgerald
- Alex Gebben
- Alex Reynolds
- Aj Terio
- Andres Serrano
- Aryan
- Ari Matrajt Frid
- Arjun Mody
- Barrett Lister
- Ben Clairday
- Benjamin Hyde
- Blake Wilson
- Lavender Giebner
- Brandon Phillips
- Cannon Leitz
- Chris Wachuta
- Colton Huff
- Collin Kendall
- Cole Metcalf
- Collin Ruprecht
- David Li
- Duncan Laird
- Dylan Breglio
- Efrosini Krokos
- Emilee Novak
- Ethan Polacsek
- Ethan Sanchez
- Ethan Silverman
- Fin McKemey
- Garrett Miller
- Grreshan Ramesh
- Hailey Usher
- Helen Do
- Ian Farrar
- Ian O'neill
- Jason Allshouse
- Jace Aschbrenner
- Jarod Ocampo
- Jadin Zaccagnino
- Jess Corbitt
- Josh Beijer
- John Bileschi
- Jon Ezell
- Jonathon Gruener
- Josh Gregory
- Josh Sweeney
- Juliette Goubeaud
- Katie Schutt
- Kevin Kim
- Kelso Norden
- Kyra Anderson
- Kyle Hashiro
- Kyle Pohle
- Luke Nicol
- Luke Prins
- Max Lantz
- Maddox Mitchell
- Matthew Osborn
- Max Palish
- Michael Becerra
- Michael Gray
- Nicholas Gotlib
- Nick Olguin
- Noah Howell
- Oliver White
- Peter Arnold
- Riley Menke
- Sam Biehle
- Sammie Duran
- Sam Gluskoter
- Sarah Pepper
- Sean Riddle
- Sierra Greeley
- Sophie Berry
- Sophia Montie
- Tim Hellweg
- Tiana Vitry
- Trent Bjorkman
- Travis Mulford
- Tyler Brown
- Venkata Sanyasi Krishna Vidhan Rallapalli
- Vincent Tang
- Yuting Wang
- Aryan Gandhi
- Jean Hertzberg
- Shrey Naresh Solanki
This work is licensed under CC BY-NC-SA 4.0
2 Comments. Leave new
if only you could lasercut various types of metal. Something you might want to look into is finding meshing gear train designs on GrabCAD. I have used the site multiple times for small projects and it tends to be very helpful, especially for something like gear design.
It’s a bummer that you’re encountering problems with the meshing of unique gears, being that your project seems to be so unique. Would it make sense to construct a functioning prototype with more basic gear designs, and then work from there to make your project more of your own? Regardless, I can’t wait to see your project functioning and taking shape in the form that you want it to be!