The last two weeks were semi productive but I haven’t been able to make any real progress on my project. I finished the cad drawings and discussed how to machine it with Greg Potts. The material only got here last Friday so i have not had time to go into the machine shop. I have a lot of work to do before the final presentation but it will get done. Should be a few hours in the machine shop but totally manageable in a week. The bearings arroved a long time ago and I soaked them in acetone to dissolve the grease so it spins more freely.
Search for content or authors
This Year’s Students
- Abigail Angwin
- Adlai White
- Alexis Cisneros
- Alex Fitzgerald
- Alex Gebben
- Alex Reynolds
- Aj Terio
- Andres Serrano
- Aryan
- Ari Matrajt Frid
- Arjun Mody
- Barrett Lister
- Ben Clairday
- Benjamin Hyde
- Blake Wilson
- Lavender Giebner
- Brandon Phillips
- Cannon Leitz
- Chris Wachuta
- Colton Huff
- Collin Kendall
- Cole Metcalf
- Collin Ruprecht
- David Li
- Duncan Laird
- Dylan Breglio
- Efrosini Krokos
- Emilee Novak
- Ethan Polacsek
- Ethan Sanchez
- Ethan Silverman
- Fin McKemey
- Garrett Miller
- Grreshan Ramesh
- Hailey Usher
- Helen Do
- Ian Farrar
- Ian O'neill
- Jason Allshouse
- Jace Aschbrenner
- Jarod Ocampo
- Jadin Zaccagnino
- Jess Corbitt
- Josh Beijer
- John Bileschi
- Jon Ezell
- Jonathon Gruener
- Josh Gregory
- Josh Sweeney
- Juliette Goubeaud
- Katie Schutt
- Kevin Kim
- Kelso Norden
- Kyra Anderson
- Kyle Hashiro
- Kyle Pohle
- Luke Nicol
- Luke Prins
- Max Lantz
- Maddox Mitchell
- Matthew Osborn
- Max Palish
- Michael Becerra
- Michael Gray
- Nicholas Gotlib
- Nick Olguin
- Noah Howell
- Oliver White
- Peter Arnold
- Riley Menke
- Sam Biehle
- Sammie Duran
- Sam Gluskoter
- Sarah Pepper
- Sean Riddle
- Sierra Greeley
- Sophie Berry
- Sophia Montie
- Tim Hellweg
- Tiana Vitry
- Trent Bjorkman
- Travis Mulford
- Tyler Brown
- Venkata Sanyasi Krishna Vidhan Rallapalli
- Vincent Tang
- Yuting Wang
- Aryan Gandhi
- Jean Hertzberg
- Shrey Naresh Solanki
This work is licensed under CC BY-NC-SA 4.0
3 Comments. Leave new
Sorry that the materials coming in late has caused you to be behind. I’m confident in your machining skills to be able to finish this project on time. Keep up the good work!
Sounds as though you have fallen a little behind. That’s alright, as long as you know what still has to get done and have a plan for how to achieve it. Hope everything finished out strong! Excited to see the final project.
I’m sorry that you have had some setbacks with your project but it sounds like you are really making progress in the planning portion. Now that you got this part of the design done I’m sure the rest will go smoothly.